Floating Pond Deicer
- Floating or submersible all in 1 design. Safe in all stock tanks no expensive bulky cages to purchase and install. Adjustable cord guard. Free cord clip helps de-icer stay put and helps prevent cord chewing. Energy savings by choosing the correct de-icer for your application.
EasyPro Thermo-Pond 250 Watt Pond Heater De-Icer
- Safe for all ponds. Easy to remove float ring allows deicer to be used as a bottom heater. Thermostatically controlled, operates only when needed, saving electricity. Can be used as a surface deicer or converts in seconds to a bottom heater. 250 watt thermo-pond perfect climate deluxe pond deicer.
Pondmaster Floating Pond De-Icer by Danner Eugene Pond
- Pa34 kit includes compressor, air outlet with pressure relief valve, 100′ 3/8″ poly tubing, epmd1 air diffuser, fittings and clamps. 1/4 hp easypro rocking piston aeration systems with air diffuser. Two year warranty on compressor. Keeps pond from freezing over. 115 volts, operating cost per 24 hours, 57 cents.
200-Watt, Pond De-Icer Heated Saucer
- Item heats the area around it, keeping a small hole in your pond ice. Uses 200 watts to operate. Thermostatically controlled to operate only when necessary. Low profile saucer floats on the top of your pond. Flat shape rests easily on your pond surface.
FLOATING POND DE-ICER 200 WATT POND HEATER-POND DE ICER
- The unit will heat up and then shut off, indicated by a slight clicking sound the clicking sound means the thermostat is working properly. Installation the de-icer should be placed at the northwest corner of the pond, up against the liner in large or deep ponds, place unit in the shallowest part of the pond, preferably near a bank the unit will turn on automatically when the temperature around the heating element is at 35-¬f and turns off when the water temperature is at 45-¬f (at -10-¬f air temperature). Place the unplugged de-icer into the freezer for 30 to 45 minutes to activate the thermostat. Air test perform an “air test” to determine whether the de-icer is heating properly and the thermostat is functioning properly. Remove the de-icer from the freezer and quickly plug the de-icer into a working outlet.
Farm Innovators Model P-418 Premium Cast Aluminum Floating Pond De-Icer, 1,250-Watt
- Industry standard 10 foot supply cord. Constructed of patented cast aluminum for ultimate efficiency and safety. 1,250 watts. 1,250 watts. Thermostatically controlled pond de-iker maintains a vent hole in the ice to allow harmful gasses to escape. Constructed of patented cast aluminum for ultimate efficiency and safety. Fish and plant-friendly heater is for use in ponds of 50 to 600 gallons. Thermostatically controlled pond de-icer maintains a vent hole in the ice to allow harmful gasses to escape. Fish and plant-friendly heater is for use in ponds of 50 to 600 gallons. Industry standard 10 foot supply cord.
Floater/Sinker Pond De-Icer
- Energy efficient design helps keep down operation cost. Built-in led light indicates when heater is in use 22-foot cord 3-year limited warranty. Ideal for keeping a small hole opening the ice during cold winter months. Size medium. Stainless steel construction prevents corrosion and cracking.
Kasco Marine Lake & Pond De-icer 1hp – 120v Deicer 25ft Power Cord & Ropes C-10 Timer Thermostat Controller
- Keeps up to a 95′ diameter circle clear of ice create directional flow to eliminate water stagnation. Environmentally friendly 120 volt oil-filed motor excellent heat dissipation dependable in saltwater. 2 year limited warranty. 1 hp motor with two 20 ft mooring ropes and includes c-10 timer thermostat controller. Longer life top and bottom ball bearings etl approved to ul standards renewable zinc anode installed on motor shaft is standard.
Kasco Marine Lake & Pond De-icer 1hp – 120v Deicer 100ft Power Cord & Ropes
- Obstructions in the water such as floats on docks, boat lifts, large dock pilings, boats, etc. Other factors that may effect open water areas are bottom contour, salt content, mounting, etc. De-icers work by moving warm bottom water that is heated by the earth to the surface. It is recommended that the de-icer is 2. The effectiveness of de-icers largely depends on the depth of the surrounding water, obstructions in the water, and the geographic location of the installation. Each application and location is different and there is no set rule in determining how many de-icers are needed for a given area or which mounting option is the best. De-icing is accurately referred to as an art form more than an exact science. The shallower the water in the area surrounding the de-icer, the less warm water there is available. Your geographic location will also play a major role in the effectiveness of your de-icer. The longer and colder the winter is, the more the water will cool over time and open water may be limited accordingly. 5′ to 5′ below the water surface. May restrict the flow of water causing a smaller area of influence around the de-icer.
Medo 86Watt Pond Linear Piston Air Compressor Max Depth 8ft. 115Volt
- Medo linear piston compressor, 86 watts / 115 volts. 3 year warranty, 5 ft power cord. It is not at all uncommon for these motors to operate continuously for seven to nine years a perfect choice for summer and winter aeration needs. Maximum air flow (cfm) 30 cfm. Maximum depth 8 feet / 3/4″ outlet.
K&H Manufacturing Deluxe Perfect Climate Pond De-Icer (KH8125)
- Safe in all ponds and will not harm pond liners. Easy to maintain and clean 12 foot cord. Dimensions 6″ x 6″ x 5″. 250 watt. Floating or submersible in one convenient de icer.
Natural Current NCS3FTHTRPD Pond De-Icer Floating Solar Water Heater Extension 2
- Improves quality, safety and build value while saving money for your household. Can also be used for inside the home and outside in the garden. Designed in dana point, california by michael evingham (hmdg) natural current, planet, people and then profit made in the usa. Best available in the industry. Awarded multiple international best product and best green product in the industry.
Pond Boss DPH Pond De-Icer
- This hole allows toxic gases, caused by the breakdown of organic waste products in the pond water such as dead leaves or fish waste, to escape and oxygen to be replenished. Oxygen must always be replenished even during the winter months, so when your fish come out of their hibernation state, they will be very happy and healthy. Depending on how many fish are in the pond, the thickness, nature of the ice and how much debris has accumulated, failing to keep a breathing hole can result in stressed fish, disease and even the death of your fish during the winter seasons. This de-icer is thermostatically controlled to never get too hot and it will continue to maintain a hole in the ice even when temperatures reach -20 degree f. Our pond boss de-icer is recommended for ponds up to 600 gallons and will not harm your liner.
Aquascape 39000 Pond Heater and De-icer for Pond Water Feature Gardens, 300 Watt
- Energy efficient design helps keep down operation cost. Built-in led light indicates when heater is in use 22-foot cord 3-year limited warranty. Ideal for keeping a small hole opening the ice during cold winter months. Ensures proper gas exchange helps prevent winter fish loss and increases oxygen levels. Stainless steel construction prevents corrosion and cracking.
Kasco Marine Lake & Pond De-Icer 1hp 60 Cycle 120v Deicer 50ft Power Cord & Ropes
- Your geographic location will also play a major role in the effectiveness of your de-icer. May restrict the flow of water causing a smaller area of influence around the de-icer. Obstructions in the water such as floats on docks, boat lifts, large dock pilings, boats, etc. The longer and colder the winter is, the more the water will cool over time and open water may be limited accordingly. De-icers work by moving warm bottom water that is heated by the earth to the surface. The shallower the water in the area surrounding the de-icer, the less warm water there is available. 5′ to 5′ below the water surface. The effectiveness of de-icers largely depends on the depth of the surrounding water, obstructions in the water, and the geographic location of the installation. Other factors that may effect open water areas are bottom contour, salt content, mounting, etc. Each application and location is different and there is no set rule in determining how many de-icers are needed for a given area or which mounting option is the best. De-icing is accurately referred to as an art form more than an exact science. It is recommended that the de-icer is 2.
